Whether working with a wiring closet, telecom room, or data center, theKendall Howard 2-Post Relay Rack is the ideal racking solution. Its sturdyconstruction makes a rigid, reliable rack that can hold up to 800 lbs. ofequipment, including switches, patch panels, UPS’s, rack shelves, rackmountkeyboard trays, and more. The rack features four ¼-20 x 0.5”grounding studs on the inside of the rails that allow you to ground yourequipment directly to those studs. Also included with the rack are serratedtooth washers that, when tightened, dig in and remove paint from the rack,establishing electrical continuity throughout the rack. Whenmultiple 2-Post Relay Racks are needed, simply gang them together with the gangingholes on both sides of the frame. You can even gang both the 24U and 45U sizeracks together because the holes align. Cable pass through slots are alsoincluded on the frames to allow cabling to pass through between racks. Thecompletely open top design allows the 2-Post Relay Rack to accept cablebundles. It also makes the rack compatible with most ladder racks andcoordinating accessories. When you need a 2-post rack that offers both strengthand dependability, there is none other than the 2-Post Relay Rack.
Durability - The 2-Post Relay Rack’s welded L-bracket base and cold rolled steel design forms a sturdy, reliable rack. To maintain its weight capacity, the rack must be bolted or secured to the floor. We always recommend installing your heaviest equipment at the lowest points on the rack.
Gangable - Ganging holes on both sides of the rack make it easy to gang and secure multiple racks together. The sides also feature cable pass through holes to allow cabling to pass from one rack to the next.
Electrical Grounding - The rack features four ¼-20 x 0.5” grounding studs on the inside of the rails. These studs allow you to ground your equipment directly to the stud or with the use of bus bars, not included. The rack also includes serrated tooth washers to allow the frame to be grounded during the assembly process.
Open Top Design - The 2-Post Relay Rack’s completely open top allows for smaller trunk cabling, and makes the rack compatible with most ladder racks and accessories.
- 10-32 tapped rails
- Includes 25 10-32 rack screws
- Includes four ¼-20 grounding studs
- Gangable
- Ships knocked down
- 800 lb. weight capacity
- 19” EIA compliant
- Made in the USA
- Limited Lifetime Warranty
